Yukon

Technical Specifications

Custom Series

Top view of the Athabascan All Weather Pool model

Details

Outside Dimensions:

85’’ x 85’’ | 217 x 217 cm | 7′ x 7′

Height:

41’’ | 104 cm | 3′

Dry Weight:

735 Lbs | 333 Kg

Wet Weight:

3521 Lbs | 1597 Kg

Ground Pressure – FULL (lbs/ft2):

76.8

Water Capacity:

334 Gallons | 1264 Liters

Heater(Watts):

NA / Euro | 5500 / 2×3600

Electrical Requirements North America
(A = actual / B = breaker)
:

240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp
3 Pumps / A40amp / B50amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp

Equipment Location

arcticspas Equipment Location Yukon

Dimensioned Drawings

Dimensioned Drawings 7'
Dimensioned Drawings 7'
Dimensioned Drawings 7'

Recommended Site Access and Preparation

CUSTOM SERIES WITH FOREVER FLOOR®

Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)