Tundra
Technical Specifications
Custom Series
Details
Outside Dimensions:
93’’ x 93’’ | 235 x 235 cm | 8′ x 8′
Height:
39’’ | 98 cm | 3′
Dry Weight:
951 Lbs | 431 Kg
Wet Weight:
4381 Lbs | 1987 Kg
Ground Pressure – FULL (lbs/ft2):
78.2
Water Capacity:
411 Gallons | 1556 Liters
Heater(Watts):
NA / Euro | 5500 / 2×3600
Electrical Requirements North America
(A = actual / B = breaker):
240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp
3 Pumps / A40amp / B50amp
4 Pumps / A48amp / B60amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp
Equipment Location
Dimensioned Drawings
Gallery
Recommended Site Access and Preparation
CUSTOM SERIES WITH FOREVER FLOOR®
Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.
To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.
If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs
Your Spa can weigh as much a 1000lbs (454kg)