Mustang

Technical Specifications

Classic Series
Top view of the Athabascan All Weather Pool model

Details

Outside Dimensions:

93’’ x 93’’ | 235 x 235 cm | 8′ x 8′

Height:

39’’ | 98 cm | 3′

Dry Weight:

973 Lbs | 441 Kg

Wet Weight:

4059 Lbs | 1841 Kg

Water Capacity:

370 Gallons | 1440 Liters

Heater(Watts):

NA / Euro 4000 W

Electrical Requirements North America
(A = actual / B = breaker)
:

240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp Upgraded Classic
240 Volts / 6 Gauge Wire
1 Pump / A40amp / B50amp
2 Pumps / A40amp / B50amp 115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp

Equipment Location

EcoPak

arcticspas Equipment Location Mustang EcoPak
INYE Spa Pack
arcticspas Equipment Location Mustang INYE Spa Pack

Dimensioned Drawings

Dimensioned Drawings 8' page 1
Dimensioned Drawings 8' page 3
Dimensioned Drawings 8' page 2

Recommended Site Access and Preparation

CLASSIC SERIES WITH FOREVER FLOOR®

Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.

Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)